Show Ip Route; Table 37-3 Show Ip Route - Display Description - SMC Networks TigerStack II SMC8848M Management Manual

show ip route

This command displays information in the IP routing table.
Syntax
show ip route [config | address [netmask]]
• config – Displays all static routing entries.
• address – IP address of the destination network, subnetwork or host
for which routing information is to be displayed.
• netmask - Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
Command Mode
Privileged Exec
Command Usage
If the address is specified without the netmask parameter, the router
displays all routes for the corresponding natural class address
(page 37-12).
Example
Console#show ip route
Ip Address
--------------- --------------- --------------- ---------- ------ ---------
0.0.0.0
10.2.48.2
10.2.5.6
10.3.9.1
Total entry: 4
Console#
Field
Ip Address IP address of the destination network, subnetwork, or host. Note that
Netmask
Next Hop IP address of the next hop (or gateway) used for this route.
Protocol
Netmask
0.0.0.0
255.255.252.0
255.255.255.0
255.255.255.0

Table 37-3 show ip route - display description

Description
the address 0.0.0.0 indicates the default gateway for this router.
Network mask for the associated IP subnet.
The protocol which generated this route information. (Values: static,
local, RIP, OSPF)
G R
LOBAL OUTING
Next Hop Protocol
10.2.48.102
10.2.48.16
10.2.8.12
10.2.9.254 OSPF-intra
C
ONFIGURATION
Metric Interface
static 0
local 0
RIP 1
2
1
1
2
3
37-5