Specifying Trap Managers And Trap Types - SMC Networks TigerStack II SMC8848M Management Manual

Gigabit ethernet switch
Hide thumbs Also See for TigerStack II SMC8848M:
Table of Contents

Advertisement

S
N
IMPLE
ETWORK

Specifying Trap Managers and Trap Types

Traps indicating status changes are issued by the switch to specified trap
managers. You must specify trap managers so that key events are reported
by this switch to your management station (using network management
platforms such as HP OpenView). You can specify up to five management
stations that will receive authentication failure messages and other trap
messages from the switch.
Command Usage
• If you specify an SNMP Version 3 host, then the "Trap Manager
Community String" is interpreted as an SNMP user name. If you use V3
authentication or encryption options (authNoPriv or authPriv), the user
name must first be defined in the SNMPv3 Users page (page 5-12).
Otherwise, the authentication password and/or privacy password will
not exist, and the switch will not authorize SNMP access for the host.
However, if you specify a V3 host with the no authentication (noAuth)
option, an SNMP user account will be automatically generated, and the
switch will authorize SNMP access for the host.
• Notifications are issued by the switch as trap messages by default. The
recipient of a trap message does not send a response to the switch. Traps
are therefore not as reliable as inform messages, which include a request
for acknowledgement of receipt. Informs can be used to ensure that
critical information is received by the host. However, note that informs
consume more system resources because they must be kept in memory
until a response is received. Informs also add to network traffic. You
should consider these effects when deciding whether to issue
notifications as traps or informs.
To send an inform to a SNMPv2c host, complete these steps:
1. Enable the SNMP agent (page 5-4).
2. Enable trap informs as described in the following pages.
3. Create a view with the required notification messages (page 5-24).
4. Create a group that includes the required notify view (page 5-18).
5-6
M
ANAGEMENT
P
ROTOCOL

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8824m - annexe 1Tigerstack ii smc8824m

Table of Contents