Address Table Settings; Figure 9-1 Static Addresses - SMC Networks TigerStack II SMC8848M Management Manual

A T
DDRESS ABLE
Web – Click Address Table, Static Addresses. Specify the interface, the
MAC address and VLAN, then click Add Static Address.
CLI – This example adds an address to the static address table, but sets it
to be deleted when the switch is reset.
Console(config)#mac-address-table static 00-e0-29-94-34-de
interface ethernet 1/1 vlan 1 delete-on-reset
Console(config)#
9-2
S
ETTINGS

Figure 9-1 Static Addresses

28-2