Command Groups; Table 18-4 Command Group Index - SMC Networks TigerStack II SMC8848M Management Manual

O
VERVIEW OF THE

Command Groups

The system commands can be broken down into the functional groups
shown below
Command Group
General
System Management Display and setting of system information, basic
Simple Network
Management
Protocol
User Authentication
Access Control List
Interface
Link Aggregation
Mirror Port
18-12
C L
OMMAND INE
.

Table 18-4 Command Group Index

Description
Basic commands for entering privileged access
mode, restarting the system, or quitting the CLI
modes of operation, maximum frame size, file
management, console port and telnet settings,
system logs, SMTP alerts, and the system clock
Activates authentication failure traps; configures
community access strings, and trap receivers
Configures user names and passwords, logon
access using local or remote authentication,
management access through the web server, Telnet
server and Secure Shell; as well as port security,
IEEE 802.1X port access control, and restricted
access based on specified IP addresses
Provides filtering for IPv4 frames (based on
address, protocol, TCP/UDP port number or
TCP control code), IPv6 frames (based on
destination address, next header type, or flow
label), or non-IP frames (based on MAC address or
Ethernet type)
Configures the connection parameters for all
Ethernet ports, aggregated links, and VLANs
Statically groups multiple ports into a single logical
trunk; configures Link Aggregation Control
Protocol for port trunks
Mirrors data to another port for analysis without
affecting the data passing through or the
performance of the monitored port
I
NTERFACE
Page
19-1
20-1
21-1
22-1
23-1
24-1
25-1
26-1