Lease - SMC Networks TigerStack II SMC8848M Management Manual

Example
Console(config-dhcp)#netbios-node-type hybrid
Console(config-dhcp)#
Related Commands
netbios-name-server (35-13)

lease

This command configures the duration that an IP address is assigned to a
DHCP client. Use the no form to restore the default value.
Syntax
lease {days [hours][minutes] | infinite}
no lease
• days - Specifies the duration of the lease in numbers of days.
(Range: 0-364)
• hours - Specifies the number of hours in the lease. A days value must
be supplied before you can configure hours. (Range: 0-23)
• minutes - Specifies the number of minutes in the lease. A days and
hours value must be supplied before you can configure minutes.
(Range: 0-59)
• infinite - Specifies that the lease time is unlimited. This option is
normally used for addresses manually bound to a BOOTP client via
the host command.
Default Setting
One day
Command Modes
DHCP Pool Configuration
Example
The following example leases an address to clients using this pool for 7
days.
Console(config-dhcp)#lease 7
Console(config-dhcp)#
DHCP S
ERVER
35-15