Radius Client; Table 22-5 Radius Client Commands - SMC Networks TigerStack II SMC8848M Management Manual

U A
SER UTHENTICATION
Example
Console(config)#authentication enable radius
Console(config)#
Related Commands
enable password - sets the password for changing command modes
(22-4)

RADIUS Client

Remote Authentication Dial-in User Service (RADIUS) is a logon
authentication protocol that uses software running on a central server to
control access to RADIUS-aware devices on the network. An
authentication server contains a database of multiple user name/password
pairs with associated privilege levels for each user or group that require
management access to a switch.
Command
radius-server host
radius-server port
radius-server key
radius-server retransmit Sets the number of retries
radius-server timeout
show radius-server
22-8
C
OMMANDS

Table 22-5 RADIUS Client Commands

Function
Specifies the RADIUS server
Sets the RADIUS server network port
Sets the RADIUS encryption key
Sets the interval between sending
authentication requests
Shows the current RADIUS settings
Mode Page
GC 22-9
GC 22-10
GC 22-10
GC 22-11
GC 22-11
PE 22-12