Priority Commands (Layer 3 And 4); Map Ip Port (Global Configuration) - SMC Networks TigerStack II SMC8848M Management Manual

Command
map ip precedence
map ip dscp
map ip dscp
show map ip port
show map ip
precedence
show map ip dscp

map ip port (Global Configuration)

This command enables IP port mapping (i.e., class of service mapping for
TCP/UDP sockets). Use the no form to disable IP port mapping.
Syntax
[no] map ip port
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
Example
The following example shows how to enable TCP/UDP port mapping
globally:
Console(config)#map ip port
Console(config)#
Table 31-4 Priority Commands (Layer 3 and 4)
Function
Maps IP precedence value to a class of
service
Enables IP DSCP class of service
mapping
Maps IP DSCP value to a class of service IC
Shows the IP port map
Shows the IP precedence map
Shows the IP DSCP map
P C
RIORITY OMMANDS
(L 3
AYER AND
Mode Page
IC 31-11
GC 31-12
31-13
PE 31-14
PE 31-15
PE 31-16
31-9
4)