Figure 4-12 Setting The Startup Code; Figure 4-13 Deleting Files - SMC Networks TigerStack II SMC8848M Management Manual

M F
ANAGING IRMWARE
If you download to a new destination file, go to the File Management, Set
Start-Up menu, mark the operation code file used at startup, and click
Apply. To start the new firmware, reboot the system via the System/Reset
menu.

Figure 4-12 Setting the Startup Code

To delete a file select System, File Management, Delete. Select the file
name from the given list by checking the tick box and click Apply. Note
that the file currently designated as the startup code cannot be deleted.

Figure 4-13 Deleting Files

4-31