Clear Ipv6 Neighbors; Address Resolution Protocol (Arp); Arp; Table 36-7 Address Resolution Protocol Commands - SMC Networks TigerStack II SMC8848M Management Manual

clear ipv6 neighbors

This command deletes all dynamic entries in the IPv6 neighbor discovery
cache.
Command Mode
Privileged Exec
Example
The following deletes all dynamic entries in the IPv6 neighbor cache:
Console#clear ipv6 neighbors
Console#

Address Resolution Protocol (ARP)

Command

arp

arp-timeout
clear arp-cache
show arp
ip proxy-arp
arp
This command adds a static entry in the Address Resolution Protocol
(ARP) cache. Use the no form to remove an entry from the cache.
Syntax
arp ip-address hardware-address
no arp ip-address
• ip-address - IP address to map to a specified hardware address.
• hardware-address - Hardware address to map to a specified IP address.
(The format for this address is xx-xx-xx-xx-xx-xx.)

Table 36-7 Address Resolution Protocol Commands

Function
Adds a static entry in the ARP cache
Sets the time a dynamic entry remains in the
ARP cache
Deletes all dynamic entries from the ARP
cache
Displays entries in the ARP cache
Enables proxy ARP service
A R
DDRESS ESOLUTION
P (ARP)
ROTOCOL
Mode Page
GC 36-45
GC 36-46
PE 36-47
NE, 36-47
PE
VC 36-48
36-45