Figure 16-1 Dhcp Relay Configuration - SMC Networks TigerStack II SMC8848M Management Manual

Web – Click DHCP, Relay Configuration. Enter up to five IP addresses for
any VLAN, then click Restart DHCP Relay to start the relay service.

Figure 16-1 DHCP Relay Configuration

CLI – This example specifies one DHCP relay server for VLAN 1, and
enables the relay service.
Console(config)#interface vlan 1
Console(config-if)#ip dhcp relay server 10.1.0.99
Console(config-if)#ip dhcp restart relay
Console(config-if)#
C DHCP R
ONFIGURING
S
ELAY ERVICE
24-2
35-5
35-4
16-3