Table of Contents
Advertisement
show spanning-tree mst configuration
This command shows the configuration of the multiple spanning tree.
Command Mode
Privileged Exec
Example
Console#show spanning-tree mst configuration
Mstp Configuration Information
--------------------------------------------------------------
Configuration name: R&D
Revision level:0
Instance Vlans
--------------------------------------------------------------
1
Console#
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Command Groups Function
Editing VLAN
Groups
Configuring VLAN
Interfaces
Displaying VLAN
Information
Configuring Private
VLANs
Configuring
Protocol VLANs
2
Table 4-55 VLAN Commands
Sets up VLAN groups, including name, VID and
state
Configures VLAN interface parameters, including
ingress and egress tagging mode, ingress filtering,
PVID, and GVRP
Displays VLAN groups, status, port members, and
MAC addresses
Configures private VLANs, including uplink and
downlink ports
Configures protocol-based VLANs based on frame
type and protocol
VLAN C
OMMANDS
Page
4-230
4-232
4-239
4-240
4-242
4-229
Advertisement
Table of Contents
