show ip access-group
This command shows the ports assigned to IPv4 ACLs.
Command Mode
Privileged Exec
Example
Console#show ip access-group
Interface ethernet 1/2
IP standard access-list david
Console#
Related Commands
ip access-group (23-8)
IPv6 ACLs
The commands in this section configure ACLs based on IPv6 addresses,
next header type, and flow label. To configure IPv6 ACLs, first create an
access list containing the required permit or deny rules, and then bind the
access list to one or more ports
Command
access-list ipv6
permit, deny
permit, deny
show ipv6
access-list
ipv6 access-group
show ipv6
access-group
Table 23-3 IPv6 ACL Commands
Function
Creates an IPv6 ACL and enters
configuration mode for standard or
extended IPv6 ACLs
Filters packets matching a specified
source IPv6 address
Filters packets meeting the specified
criteria, including destination IPv6
address, next header type, and flow
label
Displays the rules for configured IPv6
ACLs
Adds a port to an IPv6 ACL
Shows port assignments for IPv6
ACLs
IP
6 ACL
V
Mode
Page
GC
23-10
IPv6-
23-11
STD-ACL
IPv6-
23-12
EXT-ACL
PE
23-14
IC
23-15
PE
23-16
23-9
S