Shutdown - SMC Networks TigerStack II SMC8848M Management Manual

Example
This forces the switch to use the built-in RJ-45 port for the combination
port 48.
Console(config)#interface ethernet 1/48
Console(config-if)#media-type copper-forced
Console(config-if)#

shutdown

This command disables an interface. To restart a disabled interface, use the
no form.
Syntax
[no] shutdown
Default Setting
All interfaces are enabled.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This command allows you to disable a port due to abnormal behavior
(e.g., excessive collisions), and then reenable it after the problem has
been resolved. You may also want to disable a port for security reasons.
Example
The following example disables port 5.
Console(config)#interface ethernet 1/5
Console(config-if)#shutdown
Console(config-if)#
SHUTDOWN
24-9