Cisco CISCO2650 - 2650 Router Hardware Installation Manual page 404

Information About the EVM-IPVS-16A Network Module
EVM-IPVS-16A Network Module Connectors
The physical connectors that appear on the EVM-IPVS-16A network module are shown in
and described in
Figure 39-2
EVM
IPVS-16A
Table 39-2 EVM-IPVS-16A Network Module Connectors
Figure
Ref. Connector
1 Terminal block 0
2 Terminal block 1
3 Gigabit Ethernet (labeled
GigE)
4 Video (labeled VIDEO)
EVM-IPVS-16A Network Module LEDs
The Cisco analog video gateway network module (EVM-IPVS-16A) has LEDs which denote the status
of the network module, shown in
Cisco Network Modules Hardware Installation Guide
39-4
Table 39-2.
EVM-IPVS-16A Network Module Connectors
2
20
10
1
Type
10-input terminal block (ports
A0-A3 and S0)
10-input terminal block (ports
A4-A7 and S1)
RJ-45 female connector
DB-37 female connector
Chapter 39 Connecting Cisco Analog Video Gateway Network Modules
11
1
3
Connects To
10-position terminal block connector (provided)
10-position terminal block connector (provided)
Straight-through two-pair Category 5
unshielded twisted-pair (UTP) cable
DB-37 to BNC video breakout cable (provided)
Figure 39-3 and described in
4
Table 39-3.
Figure 39-2
OL-2485-20