Cisco CISCO2650 - 2650 Router Hardware Installation Manual page 328

Online Insertion and Removal of Cisco Network Modules
Press RETURN to get started!
Router> enable
Router#
Restore the network module running configuration by using the following command from the service
Step 15
module prompt:
Router# copy tftp running-config tftp-server-address filename
Exit the network module session by pressing Control-Shift-6, followed by x.
Step 16
On the router, clear the network module session by using the following command:
Step 17
Router# service-module integrated-service-engine slot / unit session clear
Cisco Network Modules Hardware Installation Guide
30-6
Chapter 30 Connecting AON Network Modules
OL-2485-20