Cisco CISCO2650 - 2650 Router Hardware Installation Manual page 267

Chapter 22 Connecting Cisco Intrusion Detection System Network Modules
Related Documents
Cisco IDS Software Documentation
For more information on Cisco IDS software documentation, see the Cisco Intrusion Detection System
Tip
(IDS) Hardware and Software Documentation Guide.
For a list of caveats, documentation changes, and important last-minute information for Cisco Intrusion
Detection System Version 4.1, see the Release Notes for the Cisco Intrusion Detection System Version
4.1.
For a quick overview of the tasks required to install and initially configure Cisco IDS components, see
the Quick Start Guide for the Cisco Intrusion Detection System Version 4.1.
For installation instructions for all Cisco IDS version 4.1 hardware components, including appliances,
modules, accessories, and upgrades (such as the IDS XL card), and basic configuration tasks using
command line interface (CLI), see the Cisco Intrusion Detection System Appliance and Module
Installation and Configuration Guide Version 4.1.
For information on installing and using Cisco IDS Device Manager and Cisco IDS Event Viewer, see
the Installing and Using the Cisco Intrusion Detection System Device Manager and Event Viewer
Version 4.1.
For IDS CLI reference, including syntax and usage guidelines, see the Cisco Intrusion Detection System
Command Reference Version 4.1.
Cisco Network Modules Hardware Installation Guide
22-5
OL-2485-20