Cisco CISCO2650 - 2650 Router Hardware Installation Manual page 261

Chapter 21 Connecting Gigabit Ethernet Network Modules
Figure 21-5 Gigabit Ethernet Network Module LEDs
NM-1GE
Table 21-2 Gigabit Ethernet Network Module LEDs
LED
LINK
TX
RX
EN
Related Documents
For additional information, see the following documents.
Tip For information on obtaining documentation, see the
For information on obtaining technical assistance, see the
page
CWDM Passive Optical System Documentation
For more information on the CWDM Passive Optical System, which is often used with CWDM GBICs,
see the
OL-2485-20
GBIC
Meaning
Green indicates that a link has been established between the network module and another
networking device.
Flashing green indicates transmit activity.
Flashing green indicates receive activity.
Green indicates that the network module has passed its self-test and is available to the router.
xi.
Cisco 1000BASE-CWDM Series Passive Optical System Installation Note
RX TX LINK
LED LED LED
"Obtaining Documentation" section on page
"Obtaining Technical Assistance" section on
Cisco Network Modules Hardware Installation Guide
Related Documents
EN
EN
LED
document.
viii.
21-5