Chapter 32
Connecting Cisco Wireless LAN Controller Enhanced Network Modules
Restore the network module running configuration by using the following command from the service
Step 13
module prompt:
Router# copy tftp running-config tftp-server-address filename
On the router, clear the network module session by using the following command:
Step 14
Router# service-module integrated-service-engine slot / unit session clear
Related Documents
For additional information, refer to the following documents and resources.
Related Topic
Hardware installation instructions for the
Cisco Wireless LAN controller module
NM-AIR-WLC6 solution
Cisco IOS software website and reference
documentation
Technical documentation, including
feedback and assistance
OL-2485-20
Document Title
Connecting Cisco Wireless LAN Controller Modules
http://www.cisco.com/en/US/products/sw/iosswrel/tsd_products_support_cate
gory_home.html
Cisco IOS Software
http://www.cisco.com/en/US/products/sw/iosswrel/tsd_products_support_cate
gory_home.html
What's New in Cisco Product Documentation (including monthly listings of
new and revised documents) at
http://www.cisco.com/univercd/cc/td/doc/abtunicd/136957.htm
Cisco Network Modules Hardware Installation Guide
Related Documents
32-5