Chapter 24
Connecting Cisco Unity Express Enhanced Network Modules
SE-Module#
Restore the network module running configuration by using the following command from the service
Step 15
module prompt:
Se# copy tftp running-config tftp-server-address filename
Exit the network module session by pressing Control-Shift-6, followed by pressing x.
Step 16
Step 17
On the router, clear the network module session by using the following command:
Router# service-module integrated-service-engine slot / unit session clear
OL-2485-20
Online Insertion and Removal of Cisco Unity Express Enhanced Network Modules
Cisco Network Modules Hardware Installation Guide
24-5