Cisco CISCO2650 - 2650 Router Hardware Installation Manual page 94

1-Port Fast Ethernet and 1- or 2-Port Channelized T1/ISDN PRI with CSU Network Modules
•
Figure 4-5
FE–PRI
1FE-1CT1-CSU
Figure 4-6
FE-PRI
1FE-2CT1-CSU
Connecting Fast Ethernet Channelized T1 with CSU Modules
Use the following sections for connections to the Fast Ethernet or CT1/PRI-CSU ports.
Fast Ethernet Port
To connect the Fast Ethernet port, see the
CT1/PRI-CSU Port
To connect the CT1/PRI-CSU PRI ports, use a straight-through RJ-48C-to-RJ-48C cable to connect a
PRI port to an RJ-48C jack. (See
Cisco Network Modules Hardware Installation Guide
4-4
1-port Fast Ethernet 2-port channelized T1/ISDN PRI with CSU network module
(NM-1FE2CT1-CSU) (see
1-Port Fast Ethernet 1-Port Channelized T1 with CSU Network Module
RX TX RX
OUT IN MON
1-Port Fast Ethernet 2-Port Channelized T1 with CSU Network Module
RX TX RX
OUT IN MON
Chapter 4
Figure 4-6)
10/100BaseT
10/100BaseT
"Fast Ethernet Port" section on page
Figure 4-7.) These ports are color-coded tan.
Connecting Fast Ethernet-PRI Network Modules
EN
EN
4-2.
OL-2485-20