Omron SYSMAC CJ - REFERENCE MANUAL 01-2008 Reference Manual page 1319

Model Conversion Instructions (Unit Ver. 3.0 or Later)
Example
1280
Normal Operation
DM Area allocated to Extended parameter
Motion Control Unit settings area
D00100
#0082
&100
Indirect
specifica-
tion
The starting address of the extended parameter set-
tings area is specified by the FINS command variable
type (data area) code and word address. In this exam-
ple, #0082 specifies the DM Area and &100 specifies a
100-word offset from the beginning of the area.
Using Function Blocks
DM Area allocated to
Motion Control Unit
Variable A D00200
m #0082
&200
m+1
Variable A's data area
address is retrieved by
GETID(286).
Extended parameter
settings area
Data
GETID
A
m
m+1
Section 3-35