Omron SYSMAC CJ - REFERENCE MANUAL 01-2008 Reference Manual page 1310

Model Conversion Instructions (Unit Ver. 3.0 or Later)
Operand Specifications
Description
• FIFO Stack Read Operation (Of = 9000 to 9999 BCD)
If the leftmost digit of Of is 9, COLLC(567) will operate as a FIFO stack
instruction. The stack begins at Bs with a length specified in the rightmost
3 digits of Of.
Area
CIO Area
Work Area
Holding Bit Area
Auxiliary Bit Area
Timer Area
Counter Area
DM Area
EM Area without bank
EM Area with bank
Indirect DM/EM
addresses in binary
Indirect DM/EM
addresses in BCD
Constants
Data Registers
Index Registers
Indirect addressing
using Index Registers
Depending on the value of Of, COLLC(567) will operate as a data collection
instruction, FIFO stack instruction, or LIFO stack instruction.
Data Collection Operation (Of = 0000 to 7999 BCD)
COLLC(567) copies the source word (calculated by adding Of to Bs) to the
destination word. The same COLLC(567) instruction can be used to collect
data from various source words in the data area by changing the value of Of.
Bs
Bs+n
Bs
CIO 0000 to CIO 6143
W000 to W511
H000 to H511
A000 to A959
T0000 to T4095
C0000 to C4095
D00000 to D32767
E00000 to E32767
En_00000 to En_32767
(n = 0 to C)
@ D00000 to @ D32767
@ E00000 to @ E32767
@ En_00000 to @ En_32767
(n = 0 to C)
*D00000 to *D32767
*E00000 to *E32767
*En_00000 to *En_32767
(n = 0 to C)
--- #0000 to #7999 for
Data Collection
#8000 to #8999 for
LIFO Stack Read
#9000 to #9999 for
FIFO Stack Read
--- DR0 to DR15
---
,IR0 to ,IR15
–2048 to +2047, IR0 to –2048 to +2047, IR15
DR0 to DR15, IR0 to IR15
,IR0+(++) to ,IR15+(++)
,–(– –) IR0 to, –(– –) IR15
Of
Section 3-35
Of D
A448 to A959
---
1271