Information Needed For Ip Addressing; Setting The Ip Address From The Phaser 850 Front Panel - Tektronix Phaser 850 Setup Manual

Note
When two or more IP address methods are used simultaneously, the printer uses
the first address that it successfully obtains.

Information needed for IP addressing

Information
Internet (IP) address for
the printer
Network mask
Default Router/Gateway
address
Broadcast address
Setting the IP address from the Phaser 850 front
panel
1.
When the front panel displays READY TO PRINT, press the up-arrow button until
Menu is highlighted. Press Select.
2.
Press the down-arrow button until Printer Configuration is highlighted. Press Select.
3.
Press the down-arrow button until Network Settings is highlighted. Press Select.
4.
Press the down-arrow button until TCP/IP is highlighted. Press Select.
5.
Set the IP address:
a.
Press the down-arrow button until IP Address is highlighted. Press Select.
b.
Press the right-arrow button to highlight the part of the address that you want to
set. Press the up- or down-arrow buttons to change the numbers.
c.
When the address is set, press Select.
6.
Set the network mask:
a.
Press the down-arrow button until Network Mask is highlighted. Press Select.
b.
Press the right-arrow button to highlight the part of the address that you want to
set. Press the up- or down-arrow buttons to change the numbers.
c. When the address is set, press Select.
Networking Setup Guide
Comments
Format is x.x.x.x, where x represents a decimal number
from 0 - 255.
If you are unsure, leave this blank; the printer will
choose an appropriate mask.
Router address. You need this address if you want to
communicate with the printer from anywhere other
than the local network segment.
This is the address the printer uses to
packets. Regardless of how this parameter is set, the
accepts
printer broadcast packets from any of the
commonly used broadcast address conventions.
It should not be necessary to set this address, because
the printer calculates it automatically. However, you
can override the default setting.
Setting the Printer's IP Address
send
broadcast
23