Setting Up The Phaser 560 Printer Driver; Setting Up The Apple Laserwriter 8 Printer Driver - Tektronix PHASER 560 Service Manual

2
Installing the Printer and Drivers

Setting up the Phaser 560 printer driver

Setting up the Apple LaserWriter 8 printer driver

2-22 Phaser 560 Color Printer
Downloaded from www.Manualslib.com
Use with System Software 6.0.7, or 7.0 and later.
1.
Select Chooser from the
software.
2. Click on the icon of the Phaser 560 printer driver (on the left side of
the Chooser).
3. Click on the Zone for your printer. See your network administrator if
you have questions.
4. Select your printer from the list of printers on the right side of the
Chooser. If it is not in the list, check your hardware connections and
which zone you have selected in the Chooser.
5.
Close the Chooser.
1. Select Chooser from the
software).
2. Click on the icon of the LaserWriter 8 printer driver (on the left side of
the Chooser).
3. Click on the Zone for your printer. See your network administrator if
you have questions.
4.
Select your printer from the list of printers on the right side of the
Chooser. If it is not in the list, check your hardware connections and
which zone you have selected in the Chooser.
5.
Click Setup. Click on the PPD for your printer:
TKPH5601.PPD
TKP560P1.PPD
Check the Startup Page for your printer's configuration information
6.
Click Select.
7.
Close the Chooser.
manuals search engine
Apple menu after installing the printer's
Apple menu after installing the printer's
Standard configuration
Extended Features option