Home Screen; Figure 4-3 Es-3024 Home Screen - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

Disconnect and reconnect the switch's power to begin a session. When you reconnect the switch's power,
Step 2.
you will see the initial screen.
When you see the message "Press any key to enter Debug Mode within 3 seconds" press any key to enter
Step 3.
debug mode.
Type atlc after the Enter Debug Mode message.
Step 4.
Wait for the Starting XMODEM upload message before activating XMODEM upload on your
Step 5.
terminal.
After a successful firmware upload, type atgo to restart the switch.
Step 6.
The switch is now reinitialized with a default configuration file including the default password of "1234".

4.5 Home Screen

The home screen consists of a navigation panel and a main panel.
Introducing The Web Configurator
Navigation
Panel
Click Logout to exit the web configurator.

Figure 4-3 ES-3024 Home Screen

Dimension ES-3024 Ethernet Switch
Click here for help on
configuring a screen.
This is the
Main Panel
4-3