Dimension ES-3024 Ethernet Switch
LABEL
Destination
MAC Address Type a MAC address in valid MAC address format, that is, six hexadecimal character
VID Type the VLAN identification number.
Port Select the port to which the bandwidth control rule should apply. You may choose one
Click Apply to save your changes back to the switch or click Cancel to begin configuring this screen afresh.
12-4
Table 12-2 Bandwidth Control Setup Edit
The next three fields pertain to the destination MAC address and destination port.
pairs or click All Entries to apply the filter rule to all MAC addresses.
port only or all ports (All Ports).
DESCRIPTION
Bandwidth Control Setup