Figure 10-2 Configuring Or Editing A Filter Rule; Table 10-2 Configuring Or Editing A Filter Rule - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

LABEL
Active
Name
Source
Source MAC
Address
VID Type the VLAN group identification number.
Port Select the port to which the filter rule should be applied. You may choose one port only
Destination
Filter Setup

Figure 10-2 Configuring or Editing a Filter Rule

Table 10-2 Configuring or Editing a Filter Rule

Make sure to select this check box to activate your rule. You may temporarily
deactivate a rule without deleting it by deselecting this check box.
Type a descriptive name for this filter rule. This is for identification purpose only.
The next three fields pertain to the source MAC address and source port.
Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs or click All Entries to apply the filter rule to all MAC addresses.
or all ports (All Ports).
The next three fields pertain to the destination MAC address and destination port.
Dimension ES-3024 Ethernet Switch
DESCRIPTION
10-3