Static routes tell the ES-3024 how to forward IP traffic when you configure the TCP/IP parameters
7.1 Static Route Setup
Click Static Route Setup from the navigation panel to display the following static route summary table.
LABEL
Entry
Active
Name
Destination Address This field displays the IP network address of the final destination.
Subnet Mask
Gateway Address
Metric
Static Route Setup
Figure 7-1 Static Route Setup
Table 7-1 Static Route Setup
This field displays the index number of the route.
This field displays Yes when the static route is activated and No when is it deactivated.
This field displays the descriptive name for this route. This is for identification purpose
only.
This field displays the subnet mask for this destination.
This field displays the IP address of the gateway. The gateway is an immediate
neighbor of your switch that will forward the packet to the destination.
This field displays the cost of transmission for routing purposes.
Dimension ES-3024 Ethernet Switch
Static Route Setup
DESCRIPTION
Chapter 7
manually.
7-1