Dimension ES-3024 Ethernet Switch
LABEL
Destination
MAC Address Type a MAC address in valid MAC address format, that is, six hexadecimal character
VID Type the VLAN group identification number.
Port Select the port to which the filter rule should be applied. You may choose one port only
Click Apply to save your changes back to the switch or click Cancel to begin configuring this screen afresh.
11-4
Table 11-2 Configuring or Editing a Mirror Rule
The source and destination fields identify the traffic you want to copy for analysis. You
can identify source-destination traffic through a combination of MAC address, VLAN
group and port. Configure these parameters in the next three fields.
pairs or click All Entries to apply the filter rule to all MAC addresses.
or all ports (All Ports).
DESCRIPTION
Mirror Setup