Figure 11-2 Configuring Or Editing A Mirror Rule; Table 11-2 Configuring Or Editing A Mirror Rule - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

LABEL
Active
Name
Direction
Source
MAC Address Type a MAC address in valid MAC address format, that is, six hexadecimal character
VID Type the VLAN group identification number.
Port Select the port to which the filter rule should be applied. You may choose one port only
Filter Setup

Figure 11-2 Configuring or Editing a Mirror Rule

Table 11-2 Configuring or Editing a Mirror Rule

Make sure to select this check box to activate your rule. You may temporarily
deactivate a rule without deleting it by clearing this check box.
Type a descriptive name for this mirror rule. This is for identification purposes only.
Choose the direction to which the rule applies from Incoming, Outgoing or Both.
The source and destination fields identify the traffic you want to copy for analysis. You
can identify source-destination traffic through a combination of MAC address, VLAN
group and port. Configure these parameters in the next three fields.
pairs or click All Entries to apply the filter rule to all MAC addresses.
or all ports (All Ports).
Dimension ES-3024 Ethernet Switch
DESCRIPTION
11-3