Figure 13-1 Trunk Setup; Table 13-2 Trunk Setup - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

Dimension ES-3024 Ethernet Switch
LABEL
Trunk ID
Starting Port
Ending Port
Active
Click Apply to save your changes back to the switch or click Cancel to begin configuring this screen afresh.
13-2

Figure 13-1 Trunk Setup

Table 13-2 Trunk Setup

The trunk ID identifies the trunk group, that is, one logical link containing multiple ports
– see Table 13-1 Trunk Groups.
This is the beginning port in the trunk group's port range and is not configurable - see
Table 13-1 Trunk Groups.
Select the end port in the port range from the drop-down list box - see Table 13-1 Trunk
Groups.
Make sure to select this check box to activate the trunk group. You may temporarily
deactivate a trunk group without deleting it by clearing this check box.
DESCRIPTION
Trunk Setup