Monitor Status - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

Dimension ES-3024 Ethernet Switch
version
view
wdog
monitor
ixe2424
21-4
Table 21-1 command summary
COMMAND
brief
view <filename>
switch [on|off]
cnt [value]
status
show
vlimit <idx> <high> <low>
tlimit <idx> <limit>
flimit <bank> <idx> <limit>
fanmask <bank> [<mask>]
vclear
tclear
fclear
clear
enable [<on/off>]
test
lbt intlbt <port|All> [count]
lbt extlbt <port|All> [count]
DESCRIPTION
Displays a brief listing of packet
contents.
Displays the RAS code and driver
versions.
Displays the specified text file.
Turns the watchdog firmware
protection feature on or off.
Sets (0-34463) or displays the
current watchdog count (in 1.6 sec
units).
Displays the status of the
hardware monitor.
Displays the hardware monitor's
statistics.
Sets the maximum (<high>) or
minimum (<low>) voltage at the
specified point (<idx>).
Sets the maximum (<limit>)
temperature at the specified point
(<idx>).
Sets the maximum (<limit>) fan
revs per minute (RPM) at the
specified fan (<idx>) in the
specified bank (<bank>). A "bank"
delineates a set of fans.
Sets the fan detection mask in the
specified bank (<bank>). Use the
mask to disable monitoring of a
fan.
Clears the voltage statistics.
Clears the temperature statistics.
Clears the fan statistics.
Clears the hardware monitor
statistics.
Enables or disables the hardware
monitor.
Tests the hardware monitor chip.
ixe2424 refers to the switch chip.
Performs an internal loop back test
on a specified port or all ports.
Performs an external loop back
test on a specified port or all ports.
Commands Introduction