Table of Contents
Advertisement
17.1 Overview
One Connect is a Zyxel-proprietary feature. It complies with the IEEE 1905.1 standard and allows auto-
detection and auto-configuration. Auto-configuration enables the Multy-Pro-supported extenders to
use the same wireless settings as the controller, the VMG, in a MESH network. See
109
for more information about Zyxel MESH (Multy Pro).
Apart from auto-configuration, you can also check the connection status, do speed test, turn on or turn
off the devices in your network, block or allow a device's access and set up a guest Wi-Fi network from
the mobile device. You can even use the App to access the VMG's web configurator.
If your wireless router supports Zyxel One Connect, VMG for example, you can download and install the
Multy Pro app in your mobile device.
To let the Multy Pro app detect the VMG, the following conditions must be met:
• The mobile device with the App installed must be connected to the VMG wirelessly.
• One Connect is enabled in this screen.
Figure 114 Multy Pro App
17.2 The Home Connectivity Screen
Use this screen to enable or disable One Connect on the VMG.
Note: When Multy Pro is enabled in the Network Setting > Wireless > MESH screen, One
Connect will be enabled and grayed out automatically. To disable One Connect,
please deactivate Multy pro in the Network Setting > Wireless > MESH screen.
Click Network Setting > Home Connectivity to open the following screen.
Home Connectivity
VMG8825-B Series User's Guide
203
C
H A P T E R
17
Section 7.9 on page
Advertisement
Table of Contents
