Supported Mibs; Configuring Snmp; Table 14-1 Snmp Commands - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

Dimension ES-3024 Ethernet Switch
SNMP itself is a simple request/response protocol based on the manager/agent model. The manager issues a
request and the agent returns responses using the following protocol operations:
COMMAND
Get Allows the manager to retrieve an object variable from the agent.
GetNext Allows the manager to retrieve the next object variable from a table or list within an agent. In
SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it initiates a
Get operation, followed by a series of GetNext operations.
Set Allows the manager to set values for object variables within an agent.
Trap Used by the agent to inform the manager of some events.

14.2 Supported MIBs

MIBs let administrators collect statistics and monitor status and performance.
The ES-3024 supports the following MIBs:
SNMP MIB II (RFC 1213)
RFC 1493 Bridge MIBs
RFC 1155 SMI
RFC 1757 RMON

14.3 Configuring SNMP

To configure SNMP, click SNMP from the navigation panel. The "community" for Get, Set and Trap fields is
simply SNMP's terminology for password.
14-2

Table 14-1 SNMP Commands

DESCRIPTION
RFC 1157 SNMP v1
RFC 1643 Ethernet MIBs
RFC 2674 SNMPv2, SNMPv2c
SNMPv2, SNMPv2c or later version, compliant with RFC 2011
SNMPv2 MIB for IP, RFC 2012 SNMPv2 MIB for TCP, RFC
2013 SNMPv2 MIB for UDP
SNMP Setup