ZyXEL Communications ZyXEL Dimension ES-3024 User Manual page 138

Dimension ES-3024 Ethernet Switch
lacp
agg
port
dot1x
21-10
COMMAND
pathcost <port_no>
priority <port_no>
edgeport <port_no>
p2plink <port_no>
mcheck <port_no>
enable <port_no>
disable <port_no>
status <port_no>
actoradm activity [port_no]
[0:passive 1:active]
actoradm display [port_no]
actoradm key [port_no][key]
actoradm priority
[priority]
actoradm timeout [port_no]
[0:long_timeout|1:short_timeout]
status
keymgnt [on|off]
syspriority <priority>
Displays the specified port's path
cost.
Displays the specified port's
priority.
Displays if this port is an edge
port.
Displays whether the specified
port can connect to one bridge or
multiple bridges.
Enables the Port Protocol
Migration state machine
(Disabled, Blocking, Listening,
Learning, Forwarding) on the
specified port.
Refer to IEEE 802.3ad for more
information on link aggregation
control protocol.
Displays ports trunked using
LACP.
Enables LACP on the specified
port.
Disables LACP on the specified
port.
Displays whether LACP is
enabled on the specified port.
Allows/disallows the specified
local port to engage in trunking.
Shows whether the specified
local port is engaged in trunking.
Shows the specified local port
LACP key.
[port_no] Shows the specified local port
LACP priority.
Enables a short or long timeout
on the specified local port.
Displays LACP status on all
ports.
Turns LACP key management
on or off.
Sets the LACP system priority.
The switch with the lowest
priority becomes the LACP
"server".
"sys sw dot1x" commands relate
to IEEE 802.1X security.
DESCRIPTION
Commands Introduction