ZyXEL Communications ZyXEL Dimension ES-3024 User Manual page 72

Dimension ES-3024 Ethernet Switch
FIELD
Ingress Check If this check box is selected for a port, the device discards incoming frames for VLANs which do
not include this port in its member set.
Port Number The CPU port refers to the switch management port. By default it forms a VLAN with all Ethernet
ports. If it does not form a VLAN with a particular port then the switch cannot manage that port.
Ingress Select the port(s) for which you want to perform ingress checks.
VLAN ID The VLAN ID associates a frame with a specific VLAN and provides the information that switches
need to process the frame across the network. You may edit an existing VLAN group by clicking
its ID number.
Name This is the descriptive name for the static VLAN for identification purposes.
Active This field displays whether this static VLAN is active or not. You can temporarily stop using a
VLAN group by deactivating it rather than deleting.
Delete To permanently stop using a VLAN group, delete it by selecting that group's Delete check box
and then clicking Apply.
Click Add VLAN to create a new VLAN group or click Apply to save your changes back to the switch.
8.2.1 Adding/Editing a VLAN Group
To edit an existing VLAN group, click its ID number under VLAN ID in the VLAN Static Entry Setup screen
(Figure 8-1). To create a new VLAN group, click Add VLAN in the VLAN Static Entry Setup screen (Figure
8-1). The configuration screen for both cases is the same (Figure 8-2).
8-4
Table 8-2 VLAN Static Entry Setup
DESCRIPTION
VLAN Setup