LABEL
Active
Name
Maximum Bandwidth Type the maximum bandwidth allowed in kilobits per second for this traffic flow.
Source
MAC Address Type a MAC address in valid MAC address format, that is, six hexadecimal character
VID Type the VLAN group identification number.
Port Select the port to which the bandwidth control rule should apply. You may choose one
Bandwidth Control Setup
Figure 12-2 Bandwidth Control Setup Edit
Table 12-2 Bandwidth Control Setup Edit
Make sure to select this check box to activate your rule. You may temporarily
deactivate a rule without deleting it by clearing this check box.
Type a descriptive name for this bandwidth control rule. This is for identification
purpose only.
The next three fields pertain to the source MAC address and source port.
pairs or click All Entries to apply the filter rule to all MAC addresses.
port only or all ports (All Ports).
Dimension ES-3024 Ethernet Switch
DESCRIPTION
12-3