Figure 23-9 Vlan1Q Port Accept Command Example; Figure 23-10 Vlan1Q Port Gvrp Command Example; Figure 23-11 Vlan1Q Port Gvrp Command Example - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

Dimension ES-3024 Ethernet Switch
<all|tagged> =
This command sets the specified port to accept all Ethernet frames or only those with an IEEE 802.1Q VLAN tag.
The following example sets port 2 to accept only tagged frames.
ras> sys sw vlan1q port accept 2 tagged
23.4.9 VLAN1Q Port GVRP Command
Syntax:
ras> sys sw vlan1q port gvrp <port> <enable|disable>
where
<port>
<enable|disable> =
This command turns GVRP on or off for the specified port.
The following example turns off GVRP for port 2.
ras> sys sw vlan1q port gvrp 2 disable
23.4.10 VLAN1Q SVLAN CPU Command
Syntax:
ras> sys sw vlan1q svlan cpu <VLAN ID>
where
<VID> =
This command sets the management VLAN (CPU). You can only use ports that are members of this management
VLAN in order to manage the switch.
The following example sets VLAN ID 2 to be the CPU (management) VLAN.
ras> sys sw vlan1q svlan cpu 2
23-6
Specifies all Ethernet frames (tagged and untagged) or only tagged
Ethernet frames.

Figure 23-9 VLAN1Q Port Accept Command Example

= A port number
Turn GVRP on or off.

Figure 23-10 VLAN1Q Port GVRP Command Example

The VLAN ID. Valid parameter range = [1 – 4094].

Figure 23-11 VLAN1Q Port GVRP Command Example

IEEE 802.1Q Tagged VLAN