Figure 3-2 Loosening The Screws And Removing The Cover Plate; Figure 3-3 Inserting An Example Module - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

Figure 3-2 Loosening the Screws and Removing the Cover Plate

You should wear an anti-static wrist strap or touch any grounded or metal objects to discharge any bodily
Step 3.
static electricity before you continue.
Remove the optional module from its protective anti-static packaging. Avoid touching the onboard
Step 4.
circuit components by holding it by the edge.
Insert the optional module into an available expansion slot on the switch. Press it firmly until the
Step 5.
optional module snaps into place.
Secure it to the switch with the retaining screws.
Step 6.
Never force, bend or twist the optional modules into the expansion slots.
See section 3.3.1 for instructions on connecting the power. The switch automatically detects the installed
Step 7.
optional module. Connect any necessary network cables to the optional module and check the LEDs to
verify that it is functioning properly.
1
This is an example module only!
Hardware Connections
Slide the optional module
into the expansion slot until
it snaps into place.

Figure 3-3 Inserting An Example Module

Dimension ES-3024 Ethernet Switch
1
3-3