Configuring Or Editing A Bandwidth Control Rule - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

Dimension ES-3024 Ethernet Switch
LABEL
Max. Bandwidth
(kbps)
Source MAC
Address
Source Port
Destination MAC
Address
Destination Port
Delete
Add
Delete
Cancel

12.2 Configuring or Editing a Bandwidth Control Rule

Click Add to configure a new rule or click an index number to edit an existing Bandwidth Control setup rule.
Either way, a screen as shown next is displayed.
12-2
Table 12-1 Bandwidth Control Setup
This field displays the maximum bandwidth allowed in kilobits per second for this traffic
flow.
This field displays the source MAC address in hexadecimal format. All Entries means
all MAC addresses.
This field displays the Ethernet port number from which packets are transmitted. You
may choose one port only or all ports.
This field displays the destination. MAC address in hexadecimal format. All Entries
means all MAC addresses.
This field displays the Ethernet port number to which packets are sent. You may
choose one port only or all ports.
To delete a rule, select its checkbox in this column and then click the Delete button.
To add a rule, click this button.
To delete a rule, select its checkbox in the Delete column and then click this Delete
button.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Bandwidth Control Setup