ZyXEL Communications ZyXEL Dimension ES-3024 User Manual page 134

Dimension ES-3024 Ethernet Switch
server
exit
ip
address
alias
aliasdis
arp
httpd
icmp
ifconfig
21-6
Table 21-1 command summary
COMMAND
setCommunity [<community>]
trustedHost [<hostt>]
trapCommunity [<community>]
trapDest [<destination>]
disp
access <telnet|ftp|web|icmp>
<enable/disable>
port <telnet|ftp|web> <portNo>
secIP setEntry <index> <start-
addr> <end-addr> [[TELNET]
[FTP] [WEB] [ICMP]]
secIP active <index>
secIP inactive <index>
sec IP disp
disp
[addr]
<iface>
<0|1>
status <iface>
debug [on|off]
status
discovery <iface> [on|off]
[iface] [ipaddr] [broadcast
<addr> |mtu <value>|dynamic]
DESCRIPTION
Sets or displays the SNMP
SetRequest community.
Sets or displays the SNMP trusted
host.
Sets or displays the SNMP Trap
community.
Sets or displays the SNMP trap
server.
Shows SNMP settings.
Enables or disables a service.
Sets a port for a service.
Sets a secured entry.
Turns on a secured entry.
Turns off a secured entry.
Shows the secured entries.
Shows the device's service port
numbers and access control
settings.
Ends the console or telnet
session.
Displays the host IP address.
Sets an alias for the specified
interface.
Disables/enables the alias for the
specified interface.
Displays an interface's IP Address
Resolution Protocol status.
Enables or disables the HTTP
debug flag.
Displays the ICMP statistics
counter.
Sets the ICMP router discovery
flag.
Configures a network interface.
Commands Introduction