ZyXEL Communications ZyXEL Dimension ES-3024 User Manual page 135

ping
route
status
udp
tcp
telnet
Commands Introduction
Table 21-1 command summary
COMMAND
<hostid>
status [if]
add
<dest_addr|default>[/<bits>]
<gateway> [<metric>]
addiface <dest_addr|default>
[/<bits>] <gateway> [<metric>]
addprivate <dest_addr|default>
[/<bits>] <gateway> [<metric>]
drop <host addr> [/<bits>]
status
ceiling [value]
floor [value]
irtt [value]
kick <tcb>
limit [value]
mss [value]
reset <tcb>
rtt <tcb> <value>
status [tcb] [<interval>]
syndata [on|off]
trace [on|off]
<host> [port]
support
stats
Dimension ES-3024 Ethernet Switch
DESCRIPTION
Pings a remote host.
Displays the routing table.
Adds a route.
Adds an entry to the routing table
for the specified interface.
Adds a private route.
Drops a route.
Displays IP statistic counters.
Displays the UDP status.
Sets the TCP maximum round trip
time.
Sets the TCP minimum round trip
time.
Sets the TCP default initial round
trip time.
Drops the TCP connection of the
specified TCP Control Block.
Sets a TCP output window limit.
Inputs the TCP Maximum
Segment Size.
Resets the TCP connection of the
specified TCP Control Block.
Sets the round trip time for the
TCP control block.
Displays the TCP statistic
counters.
Turns on/off the option to send
data with the SYN packet.
Turns on/off the trace for
debugging.
Telnets to the specified host.
Shows if TFTP is supported.
Displays the TFTP status.
21-7