ZyXEL Communications ZyXEL Dimension ES-3024 User Manual page 140

Dimension ES-3024 Ethernet Switch
class
display
l2set
del
bmstorm
disable
type
basis
display
interval
set
del
mac static
21-12
COMMAND
list
<src port> <src mac> <src
vid><dest port><dest mac> <dest
vid>
<class id>
<type>
<type>
[index]
[value]
<port><threshold><direction>
<index>
disable
display [port]
set<port><mac addr.><vid>
DESCRIPTION
Lists all profiles in the internal
switch user database.
A class is the basic rule
parameters for a bandwidth
control, port mirror or port filter
rule.
Displays run-time bandwidth
control, port mirror and port filter
rule status.
Sets source/destination port,
MAC address and VLAN group
information.
A class is automatically created
when you create a bandwidth
control, port mirror or port filter
rule. This command deletes the
specified class.
These commands relate to
broadcast storm control.
Clears current run-time settings
Specifies the type of frames to
limit in the switch; broadcast,
multicast or both.
Specifies whether frames are
limited in the switch on a per-
packet or per-Byte basis.
Displays broadcast storm control
ports' settings
Sets/displays the monitor
interval.
Specifies the packet threshold
and direction (ingress/egress) on
the specified port.
Disables broadcast storm control
on this port.
Displays static MAC addresses.
Clears current run-time static
MAC address settings
Displays current run-time static
MAC addresses on the specified
port.
Configures a static MAC address
on the specified port.
Commands Introduction