Configuring Or Editing A Filter Rule - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

Dimension ES-3024 Ethernet Switch
LABEL
Active
Source MAC
Address
Source Port
Destination MAC
Address
Destination Port
Delete
Add
Delete
Cancel

10.2 Configuring or Editing a Filter Rule

Click Add to configure a new filter rule or click an index number to edit an existing filter rule. Either way, a
screen as shown next is displayed.
10-2
Table 10-1 Filter Setup
This field displays Yes when the filter rule is activated and No when is it deactivated.
This field displays the source MAC address in hexadecimal format. All Entries means
all MAC addresses.
This field displays the Ethernet port number from which packets are transmitted. You
may choose one port only or all ports.
This field displays the destination MAC address in hexadecimal format. All Entries
means all MAC addresses.
This field displays the Ethernet port number to which packets are sent. You may
choose one port only or all ports.
To delete a rule, select its checkbox in this column and then click the Delete button.
To add a filter rule, click this button.
To delete a rule, select its checkbox in the Delete column and then click this Delete
button.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Filter Setup