Table 18-2 General Commands For Gui-Based Ftp Clients - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

Dimension ES-3024 Ethernet Switch
renames it "rom-0". Likewise "get rom-0 config.rom" transfers the configuration file on the switch to your
computer and renames it "config.rom." See earlier in this chapter for more information on filename
conventions.
Enter "quit" to exit the ftp prompt.
Step 7.
18.4.3 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP clients.
COMMAND
Host Address
Login Type
Transfer Type
Initial Remote Directory
Initial Local Directory
18.4.4 FTP over WAN Restrictions
FTP over WAN will not work when:
Telnet service is disabled in Secured Client Sets.
The IP address(es) in the Secured Client Sets menu does not match the client IP address. If it does not
match, the switch will disconnect the Telnet session immediately.
18-4

Table 18-2 General Commands for GUI-based FTP Clients

Enter the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically supplied to the server for
anonymous access. Anonymous logins will work only if your ISP or service
administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either ASCII (plain text format) or in binary mode. Configuration and
firmware files should be transferred in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
DESCRIPTION
Firmware and Configuration File Maintenance