Figure 19-6 802.1Q Vlan Status; Table 19-5 802.1Q Vlan Status - ZyXEL Communications ZyXEL Dimension ES-3024 User Manual

19.1.4 VLAN Status
Click VLAN Status in the Statistics screen to open this screen. Use this screen to check status and membership
data about the card's IEEE 802.1Q VLANs.
LABEL
Number of VLAN
Index
VID
Member
Untagged Port
Elapsed Time
Status
Poll Interval(s)
Stop
Previous/Next
Page
Statistics

Figure 19-6 802.1Q VLAN Status

Table 19-5 802.1Q VLAN Status

This is the number of VLANs configured on the switch.
This is the VLAN index number.
This is the VLAN identification number that was configured in the VLAN Setup screen.
Ports that have been added to this VLAN are listed here in numerical order.
Untagged ports that have been added to this VLAN are listed here in numerical order.
This field shows how long it has been since a normal VLAN was registered or a static
VLAN was set up.
This field shows how this VLAN was added to the switch; dynamically using GVRP or
statically, that is, added as a permanent entry.
The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval.
Click Stop to halt polling statistics.
Click one of these buttons to show the previous/next screen if all status information
cannot be seen in one screen.
Dimension ES-3024 Ethernet Switch
DESCRIPTION
19-7