Dimension ES-4024 Ethernet Switch
This command sets the specified port to accept all Ethernet frames or only those with an IEEE 802.1Q VLAN tag.
The following example sets port 2 to accept only tagged frames.
ES-4024> sys sw vlan1q port accept 2 tagged
24.4.9
VLAN1Q PORT GVRP
Syntax:
sys sw vlan1q port gvrp <port> <enable|disable>
where
<port>
<enable|disable> =
This command turns GVRP on or off for the specified port.
The following example turns off GVRP for port 2.
ES-4024> sys sw vlan1q port gvrp 2 disable
24.4.10
VLAN1Q SVLAN CPU
Syntax:
sys sw vlan1q svlan cpu <VLAN ID>
where
<VID> =
This command sets the management VLAN (CPU). You can only use ports that are members of this management
VLAN in order to manage the switch.
The following example sets VLAN ID 2 to be the CPU (management) VLAN.
ES-4024> sys sw vlan1q svlan cpu 2
24.4.11
VLAN1Q SVLAN SETENTRY
24-6
Figure 24-9 VLAN1Q PORT ACCEPT Command Example
=
A port number
Turn GVRP on or off.
Figure 24-10 VLAN1Q PORT GVRP Command Example
The VLAN ID. Valid parameter range = [1 – 4094].
Figure 24-11 VLAN1Q SVLAN CPU Command Example
IEEE 802.1Q Tagged VLAN