sys sw vlan1q port status <port>
This command shows information about the specified port's VLAN settings.
The following example shows the settings for port 1.
ES-3124> sys sw vlan1q port status 1
Port 1 VLAN Setup :
Default VLAN ID = 1
VLAN Acceptable Type = All
GVRP = Disable
VLAN Trunking = Disable
ES-3124>
30.4.7
vlan1q port default vid
Syntax:
sys sw vlan1q port defaultVID <port> <VID>
where
<port>
<VID>
This command sets a default VLAN ID for all untagged packets that come in through the specified port.
The following example sets the default VID of port 1 to 2000.
ES-3124> sys sw vlan1q port defaultVID 1 2000
30.4.8
vlan1q port accept
Syntax:
sys sw vlan1q port accept <port> <all|tagged>
where
<port>
<all|tagged> =
This command sets the specified port to accept all Ethernet frames or only those with an IEEE 802.1Q VLAN tag.
The following example sets port 2 to accept only tagged frames.
ES-3124> sys sw vlan1q port accept 2 tagged
IEEE 802.1Q Tagged VLAN
Figure 30-7 vlan1q port status Command Example
=
A port number
=
The VLAN ID. Valid parameter range = [1 – 4094].
Figure 30-8 vlan1q port default vid Command Example
=
A port number
Specifies all Ethernet frames (tagged and untagged) or only tagged
Ethernet frames.
Figure 30-9 vlan1q port accept Command Example
Dimension ES-3124 Ethernet Switch
30-5