F10 Sub Display Setting (Line Name Setting) - SMC Networks PF3A703H-L Operation Manual

■[F10] Sub display setting (Line name setting)
Add the displayed item to the sub display.
•Default setting: Accumulated value, OUT setting, peak value, and bottom value are displayed.
•Addition of line name: Line name can be added to the default display.
A line name can be input. (up to 9 characters and/or numbers).
•Addition of display OFF: Display off can be added to the default display.
: Addition of line name and display off cannot be set at the same time.
<Operation>
Display [F10] by pressing ▲ or ▼ button in function selection mode.
Sub display setting
Press the ▲ or ▼ button to select the display style for the sub-display.
Input of line name
All the values flash.
Press S button to return to function
selection mode.
Press the ▲ or ▼ button to change the
characters.
The order of displayed characters is A → b → • • • → Y → Z → 0 →
• • • → 9 → symbol → Space. (The allowable characters is dependent
on the display digit.)
Press the S button to move to the digit on the right.
Press the S button for 1 second or longer to flash characters.
Press the S button to set.
Press the S button.
[LinE] Addition of line name is added
Press the S button to move on to input
of line name.
Return to function selection mode.
[F10] Sub display setting completed
-48-
Move on to sub display setting.
[dEF] Default setting is
selected
[oFF] Display off is
selected
Press S button to
return to function
selection mode.
No.PF※※-OMX0002