11.14.10 Replace Steam Valve
This component and connected pipes are partially under pressure
(→ p. 15), follow the instructions on page 140 in advance!
Prerequisites
• Boiler is removed → p. 193.
Procedure
1. Loosen 2 screws (crosshead).from the steam valve (1).
2. Remove the FEP tube (A) from the steam valve (1).
3. Unplug the two electrical connectors (a+b) from the steam valve (1).
Version 1.4 EN
Repair > Milk Module Repairs (Metal Component Support)
1
A
a+b
Momento 120 Service Manual
Removing FEP
tubes: → p. 142
Fig. 167
195